Világos. Nem nagy durranás, de pepecs meló.
Hál'Istennek az Abit KT7A-RAID BIOS-ában még a tulajdonos életkorát is lehet állitani, szal megvannak ezek az opciók.
Most: uninstall 12.90
Tweak utilities out, 21.81-es fel.
Aztán AGP Driving Value .
Eredményt holnap jelentem.
Thx a segitséget.
Sirmelon: offline
Si vis pacem, para bellum!
Check your BIOS setup, usually in the Chipset Features Setup, for something called the AGP Driving Value. This value controls the timing of the AGP driver in Windows. The value you place here can make AGP4X stable. This value is a hex value from 00-FF.
In order to place a value here you might need to change another BIOS setup feature called the AGP Driving Control. This should appear with the AGP Driving Value. Set this to MANUAL if not already. The other option is AUTO.
Try setting this value to DA or EA. Try DA for a VIA Apollo Pro 133A motherboard. On a KT133 motherboard you might want to try E7.
Save your options and reboot your machine. Make sure you are running AGP4X and try some 3D games. Where they might have hung or crashed before they should now be running fine. If not, then go back into the BIOS Setup and try another value. I've found that values that end in an 'A' seem to work the best.
If your BIOS Setup does not have the AGP Driving Value option, there are two programs on the Web that let you modify your BIOS and change this value manually to any value. These programs are called WPCREDIT and WPCRSET. You can find them at the following website:
http://www.h-oda.com/
WPCREDIT is used to modify the BIOS on the fly. Any value changed will disappear after you do a cold reboot of your machine. WPCRSET is designed to make the change each time Windows starts up.
I recommend that you use WPCREDIT to try different values and when you get one working use WPCRSET to make in 'permanent'. Keep in mind that a 'wrong' value might cause you to hang or have a corrupted display. You might have to reboot. You might want to use WPCREDIT even though your BIOS Setup has the AGP Driving Value. This might be easier as far as testing goes. Once you get a 'good' value then you can change it in your BIOS Setup without even using WPCRSET.
Go to the following website for detailed instructions on how to use these programs:
http://viahardware.com/memtweakguide1.shtm
Once you read the article and are familiar with modifying your BIOS then changing the AGP Driving Value is simple. The Driving Value is located at x'B1'. That's offset Hex, Baker One. Place a DA or EA or any other value that you might want to try here. Once you save the change it takes effect immediately. If it does work for you then you can change your BIOS Setup or use WPCRSET.
If you have an ASUS P3V4X motherboard, there is a special utility that you can use to alter the AGP Driving Value. It is available here:
http://www.users.bigpond.net.au/slop/beta4w.com
If you add the line 'beta4w x' to your autoexec.bat, it will set the AGP Driving Value to FF automatically.
Try setting your memory to run at CAS4 if you have the option, and if not use WPCREDIT to change the two bits associated with CAS latency to 11. This will lead to a drop in memory bandwidth but may allow you to enable the other AGP features.
If you are running your memory at 100mhz and you have the option to set it to 133mhz, try doing so.
You can also try setting the PCI texture memory size settings for Direct3D and OpenGL to their maximum settings. Although this setting only appears to be useful for PCI cards, it still may help. However, this fix only works for some people.
Amint láthatod, itt régebbi alaplapokról van szó, de nincs jelentősége
Szerintem, ugyanúgy meg kellene próbálgatni ezeket az értékeket megváltoztatni, hátha bejön. S legelőször, azt kellene kipróbálni, hogy a 21.81-es driver mit csinál akkor, ha az AGP 1*.
Ha a hiba fennáll, akkor máshol keresünk megoldást, ha megszűnik, máris lehet állítgatni
OK?
Yes, Sir, I speak english perfectly.
Copy this text here please!!!!!
Right now!!!
Si vis pacem, para bellum!
Tudsz angolul?
Ha igen, becopyzom ide
Hol, hol, hol, hol az a hely?????
Mi a megoldás???????
AGP 4x bekapcsolva a BIOS-ban.
Si vis pacem, para bellum!
ICQ azért lenne jó, mert sokkal könnyebb és gyorsabb lenne kitalálni, mi a gond, mivel ott egyszerűbben, s részletesebben meg lehetne beszélni, mivel az online.
Találtam egy helyet, ahol olvastam a problémádról,s annak egyik lehetséges megoldásáról, de attól hanyatt esnél azt hiszem, meg a kedved is elmenne...
AGP hányszoros nálad?
4*-es , igaz?
Annyira van BIOS-ban kapcsolva?
ICQ-m nincs.
De futtatok, Raint pl.
Az baj?
A virusirtót kikapcsoltam ahogy kérte.
Si vis pacem, para bellum!
Egész véletlenül, nincs ICQ-d?
Már már a virtuális öngyilkosság gondolatával foglalkozom.
Megyek és egy szál X-Winggel rámegyek egy csillagrombolóra!!
Si vis pacem, para bellum!
Hát, ez eddig nem hangzik valami jól
Ismerősömnek ugyanezt csinálta, s ott a Via 4 in 1 hiánya okozta a problémát
Ahogy azt feltettük, minden jó lett.
Megpróbálok vmi megoldást keresni, vagy rájönni mi okozhatja, azon túl,
hogy a VIA chipsetről sok "szépet" lehet hallani....
